docdrive

Free · UK · CDM 2015-aligned

RAMS for landscapers

Machinery, manual handling, chemicals and cutting — landscaping RAMS cover a surprisingly broad range.

Key hazards covered

Contact with machineryManual handling of materialsSilica from cutting slabsHazardous substances (treatments)
Start with your trade

Pick the closest trade to pre-fill hazards, controls, PPE and method steps — then edit everything to your actual job.

Contractor
Project / site
Scope of works
Personnel
PPE required
Risk assessment
9 Medium→
4 Low
Method statement
1.

This is a drafting aid, not a substitute for professional H&S advice. Review and adapt every RAMS to your actual site, and have a competent person approve it before work begins.

Preview
Pick a trade, fill in the job, and your RAMS appears here as a real A4 document the moment you generate it.

RAMS for landscapers: common questions

What should a landscaping RAMS cover?
Contact with mowers, diggers and power tools, manual handling of slabs, sleepers and aggregate, silica dust from cutting paving, and hazardous substances in treatments and weedkillers. Start from construction and tailor the plant and substances.
Does it cover cutting slabs and paving?
Cutting slabs releases silica dust — the construction library's dust controls apply (water suppression, FFP3 masks). Keep them in even for a few cuts.
Is this RAMS generator free?
Yes — you can create RAMS documents on the free plan with a small footer credit. Upgrading removes the footer, unlocks the full hazard library and your branding, and saves your hazard libraries so the next one takes minutes.
Does this guarantee I'm compliant?
No — and be wary of any tool that claims it does. It gives you a professional, well-structured starting point built from common trade hazards. You must review and adapt every RAMS to your actual site, and a competent person must approve it before work begins.
Will a principal contractor accept it?
The document follows the standard RAMS structure principal contractors expect — scope, risk assessment with a 5×5 matrix, method statement, PPE, emergency arrangements and an operative sign-off sheet. As with any RAMS, the contractor reviews and approves it against their site.

RAMS for other trades

RAMS for groundworkersRAMS for general buildersRAMS for gardeners

Or start from the main RAMS generator and pick any trade.

This generator produces a drafting aid, not professional health & safety advice, and does not itself guarantee compliance. Every RAMS must be reviewed, adapted to site-specific conditions and approved by a competent person before work begins.