docdrive

Free · UK · CDM 2015-aligned

RAMS for scaffolders

Work at height is the whole job — a scaffolder's RAMS lives or dies on fall prevention.

Key hazards covered

Falls during erection/dismantlingDropped materials and toolsManual handling of componentsCollapse from incorrect loading
Start with your trade

Pick the closest trade to pre-fill hazards, controls, PPE and method steps — then edit everything to your actual job.

Contractor
Project / site
Scope of works
Personnel
PPE required
Risk assessment
9 Medium→
4 Low
Method statement
1.

This is a drafting aid, not a substitute for professional H&S advice. Review and adapt every RAMS to your actual site, and have a competent person approve it before work begins.

Preview
Pick a trade, fill in the job, and your RAMS appears here as a real A4 document the moment you generate it.

RAMS for scaffolders: common questions

What should a scaffolding RAMS focus on?
Fall prevention during erection and dismantling, dropped-object controls (exclusion zones, tool lanyards), manual handling of tubes and boards, and correct loading/ties. Start from the construction library and tailor the method to your sequence.
Does it include an exclusion zone and dropped-object controls?
The working-at-height controls include exclusion zones below the work area and securing tools against dropping. Adapt these to the specific structure and public interfaces on your site.
Is this RAMS generator free?
Yes — you can create RAMS documents on the free plan with a small footer credit. Upgrading removes the footer, unlocks the full hazard library and your branding, and saves your hazard libraries so the next one takes minutes.
Does this guarantee I'm compliant?
No — and be wary of any tool that claims it does. It gives you a professional, well-structured starting point built from common trade hazards. You must review and adapt every RAMS to your actual site, and a competent person must approve it before work begins.
Will a principal contractor accept it?
The document follows the standard RAMS structure principal contractors expect — scope, risk assessment with a 5×5 matrix, method statement, PPE, emergency arrangements and an operative sign-off sheet. As with any RAMS, the contractor reviews and approves it against their site.

RAMS for other trades

RAMS for general buildersRAMS for roofersRAMS for demolition contractors

Or start from the main RAMS generator and pick any trade.

This generator produces a drafting aid, not professional health & safety advice, and does not itself guarantee compliance. Every RAMS must be reviewed, adapted to site-specific conditions and approved by a competent person before work begins.